K9122 – Propane and/or Natural Gas ONLY (No Gasoline Option after conversion) Conversion Kit
Generator Conversion Kit from the industry leader US Carburetion allows you to convert your existing gasoline powered generator to use propane and natural gas *gasoline option is removed*. Easy ,do-it-yourself installation with simple, clear instructions
Dedicated¬†low pressure propane and natural gas and require drilling the carburetor. ¬†Installing this kit will no longer allow you to run your generator on gasoline.
This kit includes a regulator with a¬†push pin primer¬†(purge pin) for purging and priming as a standard feature.¬† No mounting bracket is needed for the regulator.¬† It has two mounting lugs and will allow it to fit on just about any generator by drilling two 1/4″ holes in the frame (as shown in the picture on the right).¬† There are also two threaded holes underneath for bottom mounting (shown below on the left and center pictures).
The engine regulator has a 3/4″ FNPT, female fuel pipe inlet, mounting lugs and mounting hardware, fuel delivery parts for use at the carburetor, hose, clamps, and other fittings for compete operation (less hook-up hoses of course).¬† Again, these kits are for up to 12hp engines that are considered attended and used completely, exclusively, outdoors.