Description
Tri-Fuel that use an adapter installed between the carburetor and the air cleaner and do not require drilling the carburetor.
Includes a regulator with a push pin primer (purge pin) for purging and priming as a standard feature. No mounting bracket is needed for the regulator. It has two mounting lugs and will allow it to fit on just about any generator by drilling two 1/4″ holes in the frame (as shown in the picture on the right). There are also two threaded holes underneath for bottom mounting (shown below on the left and center pictures). The engine regulator has a 3/4″ FNPT, female fuel pipe inlet, mounting lugs and mounting hardware, fuel delivery parts for use at the carburetor, hose, clamps, and other fittings for compete operation (less hook-up hoses of course). Again, these kits are for engines that are considered attended and used completely, exclusively, outdoors.
Please note: The picture is a representation of the kit. Parts will vary according to engine type
This Kit IS ALL NEW PRODUCT. It is being sold “as is” to liquidate older stock. This kit has all the parts necessary for complete installation. We do not allow exchanges of the adapter in this kit to fit other engines like we sell on our Motor Snorkel or USCARB generator conversion kit websites. IF YOU ARE UNSURE, IT MAY BE BEST TO PURCHASE A GENERATOR SPECIFIC KIT FROM USCARB. We have a 20 year record of outstanding customer service, but this kit is PRICED SO LOW because you will NOT receive service, help or warranty which are always included in our regular priced kits.
This Tri-fuel conversion kit will take your gas powered Honda generator to the next level. The kit is designed to work with the Honda GX series and Chonda Clone carburetors (mostly single cylinder 8-10hp).
The included instructions and supplies will allow you to modify your current ENGINE or GENERATOR to use propane, natural gas or gasoline. Given the tendency of gasoline to go bad or gum up the generator, having this option gives you great versatility. First, it can be used on the Honda engine it was designed for and on natural gas and propane. Of course, the gasoline option still is functional, however some carburetors will have a gasoline bowl vent that will be covered by the adapter which will not allow the engine to run properly on gasoline without first removing the adapter. (This is just another reason why the Motor Snorkel system is superior since it never has to be removed.)
We do not recommend or condone any alterations or misuse of our systems due ot safety issues. However, many people have used this adapter experimenting with different fuels like hydrogen, methane and biogas. (View USCarburetion Videos on YouTube) The engine regulator in the kit can handle from 4” to 14” water column inlet pressure.
This Kit is selling for almost half price, therefore tech assistance is available but will not be offered OVER THE PHONE. However, our websites at www.MotorSnorkel.com and www.USCARB.com included FAQ’s and a very extensive technical forum that should be able to answer about any question, if you still need help then you may contact us at the websites mentioned above and chat with one of our qualified customer service representatives or you may leave us a message.
Please follow the detailed instructions included with the conversion kit so this should not be an issue.
Please see our other listings for the 12′ Propane Cylinder Hose Connection Kit to run your generator off of 20# cylinders or up to 100# cylinders…NPSK-12 Accessory Kit
Other than the lower 48 states, buyer will pay the actual current shipping costs.
K9151 Kit Can fit the following:
Centurion
5kw 10hp
Champion
41155 5500w 10hp
Chonda
5000w 10hp
5500w 11hp
Dewalt
2400w Honda GX240
Generac
GP5000 Chonda
GP5500 Chonda 5939
Gilette
GPNR-50H Honda GX270
PP-50H Honda GX270
PP-50EH Honda GX270
Homelite
HG5000 Chonda 389cc
Honda
EB3500XK1 Honda GX240
EF3500
EF3800S Honda GX240
EF4000
EG4000CL Honda GX270
EM3500 Honda GX240
EV4010
EX4500 Honda GX240
EW140 Honda GX240
GX240
GX270
Honeywell
HW5500 6037/3036
King Craft
5500w JD JD29112501
Powerworks
Rato 389cc
